Kubeflow

  • Kubeflow Charmers | bundle
  • Cloud
Channel Revision Published
latest/candidate 294 24 Jan 2022
latest/beta 430 30 Aug 2024
latest/edge 423 26 Jul 2024
1.9/stable 426 31 Jul 2024
1.9/beta 420 19 Jul 2024
1.9/edge 425 31 Jul 2024
1.8/stable 414 22 Nov 2023
1.8/beta 411 22 Nov 2023
1.8/edge 413 22 Nov 2023
1.7/stable 409 27 Oct 2023
1.7/beta 408 27 Oct 2023
1.7/edge 407 27 Oct 2023
juju deploy kubeflow --channel 1.9/stable
Show information

Learn to deploy on juju >

Platform:

Relevant links

Discuss this bundle

Share your thoughts on this charm with the community on discourse.

Join the discussion

Welcome to the Deploy Charmed Kubeflow to AKS guide. This how-to guide will take you through the steps of deploying Kubeflow to an Azure Kubernetes Service (AKS) cluster. From an architectural point of view, we will spin up an AKS cluster on Azure cloud using Azure CLI on our local machine. Then with kubectl and juju still on our local machine, we will interact with the cluster to deploy Kubeflow there.

Requirements:

Content

Deploy AKS cluster

See here for a complete guide on how to do exactly that.

Set up Juju

Set up juju on your local machine to access the remote Kubernetes cloud.

  1. Install juju. Charmed Kubeflow 1.8 is compatbile with juju 3.4 as mentioned in the Supported versions page.
sudo snap install juju --channel=3.4/stable
  1. Add your AKS cluster as a cloud to Juju.
juju add-k8s aks --client
  1. Bootstrap a Juju controller.
juju bootstrap aks aks-controller
  1. Add a Juju model using kubeflow as its name.
juju add-model kubeflow
  1. Verify that namespace kubeflow exists
kubectl get ns

Deploy Kubeflow bundle

  1. Deploy Charmed Kubeflow bundle with the following command.
juju deploy kubeflow --channel=1.8/stable --trust
  1. Wait until all charms are in green/active state. You can check the state of the charms with the following command. In case you face any issues, refer to the Known issues section below. Keep in mind that oidc-gatekeeper will go to Blocked status until we configure it as shown in next steps.
juju status --watch 5s --relations
  1. Make Kubeflow dashboard accessible by configuring its public URL to be the same as the LoadBalancer’s public IP.
PUBLIC_URL="http://$(kubectl -n kubeflow get svc istio-ingressgateway-workload -o jsonpath='{.status.loadBalancer.ingress[0].ip}')"
echo PUBLIC_URL: $PUBLIC_URL

juju config dex-auth public-url=$PUBLIC_URL
juju config oidc-gatekeeper public-url=$PUBLIC_URL
  1. Configure Dex-auth credentials. Feel free to use a different (more secure!) password if you wish.
juju config dex-auth static-username=user@example.com
juju config dex-auth static-password=user
  1. Navigate to the PUBLIC_URL printed above to access Kubeflow dashboard. You should first see the Dex login screen. Once logged in with the credentials set above, you should now see the Kubeflow “Welcome” page.

Known issues

Oidc-gatekeeper “Waiting for pod startup to complete”

If you see the oidc-gatekeeper/0 unit in juju status output in waiting state with

oidc-gatekeeper/0* waiting idle 10.1.121.241 Waiting for pod startup to complete.

You can reconfigure the public-url configuration for the charm with following commands

PUBLIC_URL="http://$(kubectl -n kubeflow get svc istio-ingressgateway-workload -o jsonpath='{.status.loadBalancer.ingress[0].ip}')"
juju config oidc-gatekeeper public-url=""
juju config oidc-gatekeeper public-url=$PUBLIC_URL

Clean up resources

For AKS clean up, refer to the guide mentioned here. In order to clean up juju, run the following:

juju unregister aks-controller
juju remove-cloud aks --client

Help improve this document in the forum (guidelines). Last updated 4 months ago.