Kubeflow

This guide describes how you can get started with Charmed Kubeflow (CKF), from deploying to accessing it. It is intended for system administrators and end users.

CKF provides a simple, out-of-the-box way to deploy Kubeflow. It sets default configurations, while still providing flexibility to configure it as you like.

Requirements

• Ubuntu 20.04 (Focal) or later.
• A host machine with at least a 4-core CPU processor, 32GB RAM and 50GB of disk space available.

Install and configure dependencies

CKF relies on:

• Kubernetes (K8s). This tutorial uses MicroK8s, an open-source zero-ops lightweight distribution of Kubernetes, to run a K8s cluster.
• A software orchestration engine. This tutorial uses Juju to deploy and manage the Kubeflow components.

Install MicroK8s

MicroK8s can be installed using snap as follows:

sudo snap install microk8s --channel=1.29/stable --classic

After MicroK8s is installed, you need sufficient permissions to access it. Grant those as follows:

sudo usermod -a -G microk8s $USER

To refresh the permissions, restart your machine or run the following command:

newgrp microk8s

See Get started with MicroK8s for more details about installing MicroK8s.

Configure MicroK8s

For deploying CKF, additional features from the default ones that come with MicroK8s are needed. These can be installed as MicroK8s add-ons. Run the following command to enable them:

sudo microk8s enable dns hostpath-storage metallb:10.64.140.43-10.64.140.49 rbac

To confirm that all add-ons are successfully enabled, check the MicroK8s status as follows:

microk8s status

Install Juju

Juju can be installed using snap as follows:

sudo snap install juju --channel=3.4/stable

On some machines, there might be a missing folder required for Juju. To ensure this folder exists, create it as follows:

mkdir -p ~/.local/share

See Get started with Juju for more details about installing Juju.

Configure Juju

Enable MicroK8s for Juju as follows:

microk8s config | juju add-k8s my-k8s --client

Next, deploy a Juju controller to your MicroK8s cluster:

juju bootstrap my-k8s uk8sx

The Juju controller is used to deploy and control the Kubeflow components.

You now need to create a Kubeflow model for the Juju controller as follows:

juju add-model kubeflow

Deploy CKF

MicroK8s uses inotify to interact with the file system. Kubeflow requires increasing the inotify limits. To do so, run the following commands:

sudo sysctl fs.inotify.max_user_instances=1280
sudo sysctl fs.inotify.max_user_watches=655360

If you want these commands to persist across machine restarts, add the following lines to /etc/sysctl.conf:

fs.inotify.max_user_instances=1280
fs.inotify.max_user_watches=655360

To deploy CKF with Juju, run the following command:

juju deploy kubeflow --trust --channel=1.9/stable

Once the deployment is completed, you get a message like the following:

Deploy of bundle completed.

Check the status of the components as follows:

juju status

Use the watch option to continuously track their status:

juju status --watch 5s

You should expect an output like this:

Model     Controller  Cloud/Region      Version  SLA          Timestamp
kubeflow  uk8sx       my-k8s/localhost  3.4.5    unsupported  16:12:02Z

App                      Version                  Status  Scale  Charm                    Channel          Rev  Address         Exposed  Message
admission-webhook                                 active      1  admission-webhook        1.9/stable       344  10.152.183.153  no       
argo-controller                                   active      1  argo-controller          3.4/stable       545  10.152.183.168  no       
dex-auth                                          active      1  dex-auth                 2.39/stable      548  10.152.183.184  no       
envoy                                             active      1  envoy                    2.2/stable       263  10.152.183.74   no

Unit                        Workload  Agent      Address     Ports          Message
admission-webhook/0*        active    idle       10.1.80.9                  
argo-controller/0*          active    idle       10.1.80.10                 
dex-auth/0*                 active    idle       10.1.80.11                 
envoy/0*                    active    idle       10.1.80.14

CKF is ready when all the applications and units are in active status. During the configuration process, some of the components may momentarily change to a blocked or error state. This is an expected behaviour that should resolve as the bundle configures itself.

Access your deployment

You can interact with CKF using a dashboard, accessed through an IP address.

Configure dashboard access

To enable authentication for the dashboard, set a username and password as follows:

juju config dex-auth static-username=admin
juju config dex-auth static-password=admin

Access the dashboard

To check the IP address associated with your deployment, run the following command:

microk8s kubectl -n kubeflow get svc istio-ingressgateway-workload -o jsonpath='{.status.loadBalancer.ingress[0].ip}'

To access your deployment, open a browser and visit the dashboard IP. You should see the login page where you need to enter the credentials previously set up.

You should now see the welcome page:

Get started by clicking on Start Setup. Next, create a namespace for keeping all files and settings within a single location:

Click on Finish to display the dashboard:

Next steps

• Once deployed, build your first ML model on Kubeflow.
• To learn about common tasks and use cases, see how-to guides.
• To learn about the advantages of using CKF over upstream Kubeflow, see Upstream vs Charmed Kubeflow.

---