Nuage Vrsg

access-port | string

Default: eth1

The access port to use for routing of tenant traffic to the external public network(ex: eth0) This configuration is need only when you want to use gateway functionality. Here you provide what interface /port of VRSG machine which will be used as access side for Outside Network. For gateway functionality you have to give access-port. You must give this configuration as your deployment will fail is this parameter is not provided. Imp Note: Make sure your access-port interface is up but should not have any IP address.

fip-id | string

floating IP uuid

gateway-port-name | string

Default: eth1

access port

network-ports | string

Default: eth1

This is Optional and will be used in future release. Space-delimited list of network ports to use for routing of instance traffic to the external public network such as interfaces (eth0) This configuration is Optional.

uplink-gateway-ip | string

IP in uplink_subnet for vport to be created on nuage-vrsg

uplink-intf-mac | string

external gateway mac address

uplink-ip | string

external gateway IP address

uplink-netmask | string

external subnet. Access side network for nuage-vrsg and externel machine

uplink-subnet | string

external network. Access side network fro nuage-vrsg and external machine

vlan-id | string

Default: 0

vlan to tag the traffic

vrs-packages | string

Default: nuage-metadata-agent nuage-openvswitch-common nuage-openvswitch-datapath-dkms nuage-python-openvswitch nuage-openvswitch-switch

List of packages to install for VRS. This is Optional as we already have all of them as default value.

vrs-ppa-key | string

Optional KEY to Nuage VRS PPA containing Debian packages.

vrs-repository-url | string

Nuage VRS repository containing Debian packages.This is must for installing vrs-packages

vsc-controller-active | string

Default: 1.1.1.1

Active VRS controller to use. This is mainly used when your Nuage-VSC is not deployed via JUJU, then you can mention your Active VSC IP. When Nuage-VSC is being deployed via juju charm and then configuration is optional as vsc-controller-active ip is being retrieved form relation-get and it will override this vsc-controller-active config value.

vsc-controller-standby | string

Default: 1.1.1.2

Optional Standby VRS controller to use ( this is for redundant VSCs) This is mainly used when your Nuage-VSC is not deployed via JUJU, then you can mention your Standby VSC IP. When Nuage-VSC is being deployed via juju charm and then configuration is optional as vsc-controller-standby ip is being retrieved form relation-get and it will override this vsc-controller-active config value

vsd-vm-ip-address | string

vsd VM IP similar to nuage-vsd config option