default_log | string

Default: global

Default log

default_mode | string

Default: http

Default mode

default_options | string

Default: httplog, dontlognull

Default options

default_retries | int

Default: 3

Set the number of retries to perform on a server after a connection failure. It is important to understand that this value applies to the number of connection attempts, not full requests. When a connection has effectively been established to a server, there will be no more retry. In order to avoid immediate reconnections to a server which is restarting, a turn-around timer of 1 second is applied before a retry occurs.

default_timeouts | string

Default: queue 20000, client 50000, connect 5000, server 50000

Default timeouts

enable_monitoring | boolean

Enable monitoring

global_debug | boolean

Debug or not

global_default_bind_ciphers | string

Default: ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:!DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:!DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:!CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA

Sets the default string describing the list of cipher algorithms ("cipher suite") that are negotiated during the SSL/TLS handshake for all "bind" lines which do not explicitly define theirs. The format of the string is defined in "man 1 ciphers" from OpenSSL man pages, and can be for instance a string such as "AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH" (without quotes). Please check the "bind" keyword for more information. This config key will be ignored if the installed haproxy package has no SSL support.

global_default_bind_options | string

Sets the default string describing the list of global SSL bind options. Use this to force or disable certain protocols like TLS 1.0 or SSL 3.0.

global_default_dh_param | int

Default: 2048

Sets the maximum size of the Diffie-Hellman parameters used for generating the ephemeral/temporary Diffie-Hellman key in case of DHE key exchange. Default value if 2048, higher values will increase the CPU load. Values greater than 1024 bits are not supported by Java 7 and earlier clients. This config key will be ignored if the installed haproxy package has no SSL support.

global_group | string

Default: haproxy

Group

global_hard_stop_after | string

Tune HAProxy's hard-stop-after to prevent lingering HAProxy processes, e.g. 10m (LP:1874386).

global_log | string

Default: /dev/log local0, /dev/log local1 notice

Global log line ( multiples ... comma separated list )

global_maxconn | int

Default: 4096

Sets the maximum per-process number of concurrent connections to <number>.

global_quiet | boolean

Quiet

global_spread_checks | int

Sometimes it is desirable to avoid sending health checks to servers at exact intervals, for instance when many logical servers are located on the same physical server. With the help of this parameter, it becomes possible to add some randomness in the check interval between 0 and +/- 50%. A value between 2 and 5 seems to show good results.

global_stats_socket | boolean

Whether to enable the stats UNIX socket.

global_user | string

Default: haproxy

User

key | string

Key ID to import to the apt keyring to support use with arbitary source configuration from outside of Launchpad archives or PPA's.

logrotate_config | string

Override package logrotate configuration. . Warning: Setting this value back to the empty string will leave the previous config in place on disk. . Example value: . /var/log/haproxy.log { weekly rotate 52 missingok notifempty compress delaycompress postrotate invoke-rc.d rsyslog rotate >/dev/null 2>&1 || true endscript } .

metrics_prefix | string

Default: dev.$UNIT.haproxy

Prefix for metrics. Special value $UNIT can be used to include the name of the unit in the prefix.

metrics_sample_interval | int

Default: 5

Period for metrics cron job to run in minutes

metrics_target | string

Destination for statsd-format metrics, format "host:port". If not present and valid, metrics disabled. Requires "enable_monitoring" to be set to true to work.

monitoring_allowed_cidr | string

Default: 127.0.0.1/32

CIDR allowed ( multiple CIDRs separated by space ) access to the monitoring interface.

monitoring_always_critical | boolean

Default: True

Report a service that is down always as critical. If False it will only report a warning if there is still at least one working backend for each proxy.

monitoring_password | string

Default: changeme

Password to the monitoring interface ( if "changeme", a new password will be generated and displayed in juju-log )

monitoring_port | int

Default: 10000

Default monitoring port

monitoring_stats_refresh | int

Default: 3

Monitoring interface refresh interval (in seconds)

monitoring_username | string

Default: haproxy

Monitoring username

nagios_context | string

Default: juju

Used by the nrpe-external-master subordinate charm. A string that will be prepended to instance name to set the host name in nagios. So for instance the hostname would be something like: juju-postgresql-0 If you're running multiple environments with the same services in them this allows you to differentiate between them.

nagios_servicegroups | string

A comma-separated list of nagios servicegroups. If left empty, the nagios_context will be used as the servicegroup.

package_status | string

Default: install

The status of service-affecting packages will be set to this value in the dpkg database. Useful valid values are "install" and "hold".

peering_mode | string

Default: active-passive

Possible values : "active-passive", "active-active". This is only used if several units are spawned. In "active-passive" mode, all the units will forward traffic to the first working haproxy unit, which will then forward it to configured backends. In "active-active" mode, each unit will proxy the traffic directly to the backends. The "active-passive" mode gives a better control of the maximum connection that will be opened to a backend server.

services | string

Default: - service_name: haproxy_service service_host: "0.0.0.0" service_port: 80 service_options: [balance leastconn, cookie SRVNAME insert] server_options: maxconn 100 cookie S{i} check

Services definition(s). Although the variable type is a string, this is interpreted in the charm as yaml. To use multiple services within the same haproxy instance, specify all of the variables (service_name, service_host, service_port, service_options, server_options) with a "-" before the first variable, service_name, as above. Service options is a comma separated list, server options will be appended as a string to the individual server lines for a given listen stanza. If your web application serves dynamic content based on users' login sessions, a visitor will experience unexpected behaviour if each request is proxied to a different backend web server. Session stickiness ensures that a visitor 'sticks' to the backend web server which served their first request. This is made possible by tagging each backend server with a cookie. Session are sticky by default. To turn off sticky sessions, remove the 'cookie SRVNAME insert' and 'cookie S{i}' stanzas from `service_options` and `server_options`.

source | string

Optional configuration to support use of additional sources such as: . - ppa:myteam/ppa - cloud:precise-proposed/folsom - http://my.archive.com/ubuntu main . The last option should be used in conjunction with the key configuration option.

ssl_cert | string

base64 encoded default SSL certificate. If the keyword 'SELFSIGNED' is used, the certificate and key will be autogenerated as self-signed. This is the certificate used by services configured using keyword 'DEFAULT' as SSL certificate. This config key will be ignored if the installed haproxy package has no SSL support.

ssl_key | string

base64 encoded private key for the default SSL certificate. If ssl_cert is specified as SELFSIGNED or the installed haproxy package has no SSL support, this will be ignored.

sysctl | string

YAML-formatted list of sysctl values, e.g.: '{ net.ipv4.tcp_max_syn_backlog : 65536 }'

tls_crit_days | int

Default: 14

Number of days left for the TLS certificate to expire before alerting Critical in the NRPE check.

tls_warn_days | int

Default: 30

Number of days left for the TLS certificate to expire before warning in the nagios NRPE check.

userlists | string

Userlists control access to services or stats by allowing only authenticated users. . For example . - list1: groups: - G1 users tiger,scott - G2 users xdb,scott users: - tiger password $6$k6y3o.eP$JlKBx9z... - scott insecure-password elgato - xdb insecure-password hello - list2: groups: - group1 users: - alice insecure-password foo groups group1 - bob insecure-password bar groups group1 . See http://cbonte.github.io/haproxy-dconv/1.6/configuration.html#3.4

Channel	Revision	Published
latest/stable	22	01 Aug 2023
latest/beta	22	01 Aug 2023
latest/edge	22	01 Aug 2023

Landscape Dense Maas