Hardware Observer

Learn about configurations >

• collect-timeout | int

  Default: 10

  Timeout for collectors' shell commands in seconds. Changing this will also change the scrape_timeout config option for prometheus for the cos-agent relation with grafana-agent. This value is also used for the redfish client's timeout parameter. The value of this timeout should not be greater than prometheus scrape_interval (which is 60 seconds by default), as it greater would cause the scrape_timeout to be greater than scrape_interval.

• dcgm-snap-channel | string

  Default: latest/stable

  Channel to install the DCGM snap if the hardware has NVIDIA GPU. By default, it will install from latest/stable

• exporter-log-level | string

  Default: INFO

  Start the prometheus exporter with log level "exporter-log-level". By default, it will set to INFO. Allowed values are "DEBUG", "INFO", "WARNING", "ERROR", "CRITICAL". Values other than those will result in failure of the exporter.

• hardware-exporter-port | int

  Default: 10200

  Start the prometheus hardware exporter at "hardware-exporter-port". By default, it will start at port 10200.

• redfish-disable | boolean

  Boolean flag to force disabling the Redfish collector. The collector will normally be run if Redfish support is detected on the unit.

• redfish-password | string

  BMC password to be used by the redfish collector.

• redfish-username | string

  BMC username to be used by the redfish collector.

• smartctl-exporter-port | int

  Default: 10201

  Start the prometheus smartctl exporter at "smartctl-exporter-port". By default, it will start at port 10201.

• smartctl-exporter-snap-channel | string

  Default: latest/stable

  Channel to install the Smartctl exporter snap if the hardware has smart disk. By default, it will install from latest/stable.