PgBouncer

Channel Revision Published Runs on
latest/stable 5 17 Jan 2022
Ubuntu 20.04 Ubuntu 18.04 Ubuntu 16.04
1/stable 397 11 Sep 2024
Ubuntu 22.04 Ubuntu 20.04
1/stable 396 11 Sep 2024
Ubuntu 22.04 Ubuntu 20.04
1/stable 395 11 Sep 2024
Ubuntu 22.04 Ubuntu 20.04
1/stable 394 11 Sep 2024
Ubuntu 22.04 Ubuntu 20.04
1/candidate 397 02 Sep 2024
Ubuntu 22.04 Ubuntu 20.04
1/candidate 396 02 Sep 2024
Ubuntu 22.04 Ubuntu 20.04
1/candidate 395 02 Sep 2024
Ubuntu 22.04 Ubuntu 20.04
1/candidate 394 02 Sep 2024
Ubuntu 22.04 Ubuntu 20.04
1/beta 558 Today
Ubuntu 22.04 Ubuntu 20.04
1/beta 557 Today
Ubuntu 22.04 Ubuntu 20.04
1/beta 556 Today
Ubuntu 22.04 Ubuntu 20.04
1/beta 555 Today
Ubuntu 22.04 Ubuntu 20.04
1/edge 558 03 Dec 2024
Ubuntu 22.04 Ubuntu 20.04
1/edge 557 03 Dec 2024
Ubuntu 22.04 Ubuntu 20.04
1/edge 556 03 Dec 2024
Ubuntu 22.04 Ubuntu 20.04
1/edge 555 03 Dec 2024
Ubuntu 22.04 Ubuntu 20.04
juju deploy pgbouncer --channel 1/stable
Show information

Platform:

Ubuntu
22.04 20.04 18.04 16.04

Optimal PgBouncer Setup

For optimal performance, it is recommended that PgBouncer is run alongside your application. Co-locating PgBouncer with your application results in increased network performance since an additional network hop from your application to PgBouncer is avoided. Furthermore, it can also lead increased security since traffic is not routed externally through potentially untrusted machines.

When your application implements the modern (preferred) interface in PgBouncer’s supported interfaces , the PgBouncer charm is deployed as a subordinate of your application charm and your application.

Accessing PgBouncer outside of Juju

A known limitation of relating with PgBouncer (a subordinate charm) is that your application would need to be deployed as a Juju application. However, if your application exists outside of the Juju ecosystem, you can access PgBouncer externally with the Data Integrator charm.

Example setup

The steps below show you how to deploy and set up PostgreSQL, PgBouncer, and Data Integrator for access outside of Juju.

First, deploy all the charms:

juju deploy pgbouncer --channel 14/edge --trust
juju deploy data-integrator --config database-name=test_database
juju deploy pgbouncer --channel 1/edge

Feel free to change test_database to your name of choice

Integrate:

  • postgresql with pgbouncer
  • data-integrator with pgbouncer, since in this case we want to generate the credentials to access PgBouncer
juju integrate postgresql pgbouncer
juju integrate data-integrator pgbouncer

The following is a sample output of the get-credentials action run on a data-integrator unit:

juju run data-integrator/leader get-credentials
ok: "True"
postgresql:
  data: '{"database": "test_database", "external-node-connectivity": "true", "requested-secrets":
    "[\"username\", \"password\", \"tls\", \"tls-ca\", \"uris\"]"}'
  database: test_database
  endpoints: 10.205.193.65:6432
  password: mysupersecuredatabasepassword
  subordinated: "true"
  uris: postgresql://relation_id_7:mysupersecuredatabasepassword@10.205.193.65:6432/test_database
  username: relation_id_7
  version: "14.13"

You can then connect to PgBouncer with the provided uris from your application that resides outside of Juju.

Using a Virtual IP to connect to PgBouncer

If the PgBouncer charm is related to the Data Integrator charm, it is possible for a user to configure PgBouncer to use a certain Virtual IP. This assumes that the user has somehow ensured that the Virtual IP resolves to the node on which the PgBouncer charm is deployed.

To configure the PgBouncer charm with a virtual IP, run

juju config pgbouncer/0 vip=<your_virtual_ip>

Integrate with HACluster

Alternatively, you can integrate with the HACluster charm if you would like a Virtual IP that is generated and maintained for you.

HACluster is a collection of solutions by ClusterLabs designed to create and manage resources. The creation of resources like Virtual IPs is handled by Pacemaker, whereas the management of these resources is handled by Corosync.

Pacemaker will create and attach a Virtual IP to one of your Data Integrator nodes (that is related to PgBouncer), while Corosync will ensure automatic failover if the node with the Virtual IP faces connectivity or other issues. This setup requires at least 3 Data Integrator nodes, each related to both PgBouncer and HACluster.

Warning: The Virtual IP supplied to PgBouncer should be in the same subnet as the nodes on which the PgBouncer charm is running. Else, you may encounter unexpected behavior from the HACluster charm when it tries to create the Virtual IP.

Example setup

The steps below show you how to deploy and set up PostgreSQL, PgBouncer, Data Integrator, and HACluster.

First, deploy all the charms

juju deploy postgresql --channel 14/edge --trust
juju deploy -n 3 data-integrator --config database-name=test_database
juju deploy pgbouncer --channel dpe/edge
juju deploy hacluster

Note that the data-integrator requires a minimum of 3 nodes for this HACluster setup to work

Configure the VIP on pgbouncer. Please ensure that the VIP is in an accessible subnet:

juju config pgbouncer vip=10.205.193.35

Then, integrate:

  • pgbouncer with postgresql
  • pgbouncer and hacluster with data-integrator
  • pgbouncer with hacluster
juju integrate pgbouncer postgresql

juju integrate data-integrator pgbouncer
juju integrate data-integrator:juju-info hacluster:juju-info

juju integrate pgbouncer hacluster

The following is a sample output of the get-credentials action run on a data-integrator unit:

juju run data-integrator/leader get-credentials
Running operation 3 with 1 task
  - task 4 on unit-data-integrator-0

Waiting for task 4...
ok: "True"
postgresql:
  data: '{"database": "test_database", "external-node-connectivity": "true", "requested-secrets":
    "[\"username\", \"password\", \"tls\", \"tls-ca\", \"uris\"]"}'
  database: test_database
  endpoints: 10.205.193.35:6432
  password: mysupersecuredatabasepassword
  read-only-endpoints: 10.205.193.80:6432,10.205.193.98:6432
  subordinated: "true"
  uris: postgresql://relation_id_7:mysupersecuredatabasepassword@10.205.193.35:6432/test_database
  username: relation_id_7
  version: "14.13"